bending theory

Bsaed on the theory of bending bond, the paper discussed the equivalency for σ-π type double bond and bending bond, And the some rules for property of bond were explained satisfactorily.

该文根据弯键理论，讨论了σ－π型双键与弯曲键的等价性，并对多种键性规律进行了园满的解释。

The results show that point 2 and point 4 are the danger points in accordance with the eccentric bending theory for calculation.

结果表明，2、4测点是危险点；

An caustic method of symmetric cracked plates bending theory

对称型裂纹平板弯曲理论的焦散线法研究

This paper discusses the forming method high-speed grinding paraboloid of the principle and abrasive bending theory.

本文探讨了弯曲成形法高速研磨抛物面的原理和磨具弯曲成形理论。

Due to the difficulties for preparing perfect double-side sprayed specimen for three-point bending test, the present study presents a single-side and tree-point bending sprayed specimen test based on compound beam theory.

针对目前制备完美的双面涂层三点弯曲试样存在的困难，基于复合梁理论，提出了一种利用单面涂层试样的三点弯曲试验。

The calculation theory of bus flexure stiffness is based on the bending theory of uniform beams.

对客车弯曲刚度考察的计算理论是基于等截面梁弯曲理论进行的。

Basing on the elastic bending theory of beams in large deflection, the non-linear shearing behavior of cellular materials under large deformation is studied in the paper.

将梁的弹性大挠度弯曲理论应用于蜂窝壁板，研究了大变形条件下蜂窝材料的非线性剪切变形行为。

It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.

首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。

Based on plastic flow rule and the bending theory of beams, an elastic-plasticfilms/ substrates model is established.

基于梁的弯曲理论和塑性流动法则，建立了弹塑性膜/刚性基底体系界面结合能模型。

A set of conical shell formulas using bending theory different from that used for shells of revolution in general is presented in this paper.

本文进行了锥壳有矩理论公式的推导，给出了不同于一般旋转壳的有矩公式。

The principle of above method is that, using the plane bending theory of thin wall ring to solve load at first.

这种方法是应用薄壁圆环的平面弯曲理论求解负荷，然后根据实际的负荷计算轴承寿命。

Classical bending theory of beam and plate can only be fit for thin and long beam and thin due to without considering deformed influence of cross shearing.

经典的梁板弯曲理论由于未考虑横向剪切变形的影响而只能适用于细长梁和薄板。

An effective three-point bending test based on compound beam theory is introduced.

介绍了利用复合梁理论测量高速电弧喷涂层弹性模量的方法.

The Bending Theory of Skew-anisotropic Plates and Its Application in Skew Girder Bridges hand bending rolling and shearing machine

斜交构造异性板的弯曲理论及其在斜桥上的应用手动折弯卷板剪板机

About the Hypothesis of Bending Theory That There Is No Direct Stress Between the Longitudinal Fibers

关于弯曲理论纵向纤维间无正应力的假设

Theory, elasticity ground beam analogy method, generalized bending theory and transfer matrix method and so on.

其中，数值法包括有限元法和有限段法等。解析法包括广义坐标法、乌氏第二理论、弹性地基梁比拟法、广义弯曲理论、传递矩阵法等。

A non-classical approximate bending theory of laminated plates

一种非经典的近似的叠层板弯曲理论

Some elastic curved surface differential equations and neutral planes of circular piezoelectric composite laminates are derived from the elastic thin plate bending theory with small deflection.

应用小挠度弹性弯曲理论，导出圆形压电复合层薄板的弹性曲面微分方程和复合层薄板的中性面位置方程；

Skew bending theory and space truss theory are discussed briefly in the paper.

文中就有代表性的斜弯理论和空间桁架理论进行了述评。

At the present time, the finite element analysis of galloping of transmission line is mainly based on cable element theory that neglects the bending rigidity and is discrepant with bending rigidity of transmission line.

目前对输电线舞动数值分析大都基于索单元理论，这一理论不考虑抗弯刚度，与实际输电线存在抗弯刚度不符。

Some problems existing in applying formulas of bending theory for shells of revolution in general to the calculation of conical shells have also been pointed out in this paper.

通过比较，文中指出了把一般旋转壳有矩公式应用于锥壳计算所存在的问题。

The inner stress distribution of quartz rod is investigated firstly by using the pure bending theory of anisotropic beam, and numerical solution is approached.

应用各向异性柱体纯弯曲理论，探讨了石英晶体在弯矩作用下内部的应力场分布，给出了应力场的解析解法。

This paper expounds the technique theory of bending for car ′ s engine bonnet, particularly introduces the general design methods of bending machine for car ′ s engine bonnet.

本文阐述了发动机罩翻边的技术原理，详细介绍了发动机罩翻边机的总体设计思路及方案，为同类零部件的翻边工艺揭示了一种行之有效的解决办法。

Based on the General Bending Theory, Spatial buckling of thin-walled beam-columns with open cross-section is researched.

基于泛义弯曲理论展开对开口薄壁梁柱空间屈曲问题的研究。

Based on the potential flow theory and the thin plate bending theory, the governing motion equations of the aeroelastic panel models were obtained.

基于不可压缩流体势流理论亚音速气动力和弹性薄板弯曲理论建立薄板气动弹性耦合运动方程。

The bending moments and the axial forces are separately considered according to little deformation theory and the principle of superposition. Energy differential method is adopted to solve the shear lag effect of the cable-stayed bridges caused by the bending moments, where the beam-column effect is considered.

根据小变形理论和叠加原理，将弯矩和轴力作用分开处理，利用能量变分法来求解弯矩和轴力共同作用下的剪力滞效应，在分析弯矩作用时考虑了梁柱效应。

Optimization of Pulling Point on Level Jib of Tower Crane Using Vertical and Horizontal Bending Theory

用纵横弯曲理论确定塔机水平动臂的最佳吊点

Several Basic Problems about Finite Element Methods of Reissner-Mindlin Plate Bending Theory

板弯曲有限元方法中的几个问题

A stratified model for the analysis of ground subsidence due to underground excavation is established based on elastic-thin-plate bending theory in the rock mass displacement fields.

基于弹性力学中的薄板弯曲理论，在岩体移动领域建立了地表下沉预测分析的层状模型。

Nonlinear Bending Theory of Diagonal Square Pyramid Reticulated Shallow Shells

斜放四角锥扁网壳的非线性弯曲理论